Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Montebello?
Chimney cap installation in Montebello typically runs $180 to $550, with most single-flue installs landing around $250 to $400. Crown repair or replacement usually costs $400 to $1,500, depending on how much of the crown has cracked and whether the flue needs attention underneath. When a cap and a crown are done together on the same visit, most Montebello homeowners spend between $550 and $1,800 for the pair, and the written estimate sets the final price.
Those ranges reflect what a proper job actually involves here: a stainless cap sized to the flue, a crown built with the right slope and bond, and a technician who checks the flue before recommending either. We diagnose before we quote. That means we look at the crown, the cap, and the top of the flue as one system, because a cap that looks fine on the outside can be sitting on a crown that’s already letting water in.
- Cap only, single flue: $180 – $400 typical
- Crown repair (patching cracks and resealing): $400 – $800 typical
- Crown replacement (full rebuild of the crown): $700 – $1,500 typical
- Cap and crown combined: $550 – $1,800 typical
Chimney Sweep Montebello has worked on chimneys across Montebello since 2015, and the pattern we see again and again is a cap that was never there and a crown that paid for it. Call (833) 362-8107 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s what each line item covers and what it tends to run in the Montebello market this year. A cap is the metal top that keeps rain, birds and debris out of the flue. The crown is the concrete or mortar slab at the very top of the chimney that sheds water away from the masonry below. They fail differently and they’re priced differently.
| Line item | Typical range (Montebello, 2026) | What it covers |
|---|---|---|
| Single-flue stainless cap | $180 – $400 | Cap, mesh screen, mounting hardware, installation |
| Multi-flue cap | $350 – $700 | Wider cap sized across two or more flues, custom fit |
| Decorative or custom cap | $400 – $900 | Copperfield-style or custom-sized cap where the homeowner wants a specific look |
| Crown crack repair | $400 – $800 | Cleaning out failed mortar, patching cracks, resealing the crown edge |
| Full crown replacement | $700 – $1,500 | Removing the old crown, forming a new slab with proper slope and overhang |
| Crown overbuild / cast crown | $900 – $1,800 | Where the existing crown is too thin or poorly formed to repair, a cast crown is formed and poured |
| Flue tile inspection during the job | Included | Looking down the flue while the crown is open, to catch a cracked tile before it becomes a liner job |
What pushes a cap and crown job up in Montebello: height and access. A chimney that’s easy to reach from a ladder costs less than one that needs a taller setup, and a steep or awkward roof adds labor. The condition of the crown matters more than its size. A hairline crack that gets sealed this year is a repair. The same crack left through two rainy seasons usually becomes a replacement, because water gets under the crown, the mortar bed softens, and the crown starts to separate from the flue tile. Cap material matters too. A basic galvanized cap is cheaper than stainless or copper, but it doesn’t hold up the same way, and we don’t install caps we wouldn’t put on our own truck. That’s why our caps come from professional-grade lines like Olympia Chimney, Famco and Copperfield rather than a hardware-store shelf.
Older homes in Montebello, especially those built before 1990, often have crowns that were formed thin and flat, with little or no overhang past the brick. Those crowns crack early because water sits on them instead of running off. When we replace one, we build the new crown with a proper slope and enough overhang to throw water clear of the masonry. That’s a detail most single-trade sweeps skip, and it’s the difference between a crown that lasts and one that fails again in a few years.
What Affects Chimney Cap & Crown Pricing in Montebello
Six things move the number up or down on a Montebello cap and crown job. Knowing them before the technician arrives helps you read the estimate instead of guessing at it.
- Roof pitch and chimney height. A chimney on a low-slope roof is quick to access. A tall stack on a steep pitch takes more setup time, more safety gear, and more labor, and that shows up in the estimate.
- Number of flues. A single-flue cap is a straightforward fit. Two or three flues on one chimney need a wider cap built across the whole stack, which costs more but protects the crown between the flues at the same time.
- Crown condition. Surface cracks and a worn edge are a repair. A crown that’s separated from the flue, crumbling, or formed too thin to hold a patch is a replacement. We check before we recommend, and we don’t push a full replacement when a repair will do the job.
- Flue tile condition underneath. While the crown is open, we look down the flue. If the tile is cracked at the top, that’s a separate repair, and if the whole liner is compromised, we’ll talk through HeatShield resurfacing versus a full reline rather than quoting the biggest job first.
- Cap material and fit. Stainless and copper cost more than basic galvanized, but they last longer and hold their shape. A custom-sized cap on an odd flue costs more than a stock size, but a cap that doesn’t fit properly is money wasted.
- Whether both jobs are done on one visit. Cap and crown together usually cost less than booking them separately, because the access, setup and inspection happen once. That’s not a sales pitch, it’s just how the labor breaks down.
One more factor that’s specific to Montebello: the dry stretch from late spring through fall, followed by the wet winter months, is hard on masonry crowns. A crown that looks fine in July can be holding moisture by January. If you’re scheduling a chimney sweep before heating season, that’s the right moment to have the crown looked at, because the technician is already at the top of the flue.
How to Save on Chimney Cap & Crown
The biggest savings on this job come from timing and from not waiting. A $400 crown repair this year is cheaper than a $1,200 crown replacement in two years, and that’s the honest arithmetic of it. Here’s what actually helps in Montebello.
- Catch the crown early. Look at the top of your chimney from the ground with binoculars. Visible cracks, a crumbly edge, or brick that’s staining below the crown line all point to water getting in. Getting it looked at before the winter rains is the single best way to keep this a repair instead of a replacement.
- Do the cap and crown on the same visit. One setup, one inspection, one trip up the roof. Combined pricing is almost always lower than two separate bookings.
- Skip the hardware-store cap. A cheap cap that rusts out in a few years costs more in the long run than a proper stainless or copper cap from a professional line. We install Olympia Chimney, Famco and Copperfield caps because they hold up.
- Get the flue checked while the crown is open. If a cracked flue tile is caught during crown work, you’re looking at a spot repair. If it’s caught after water has been running down the inside for a season, you may be looking at HeatShield resurfacing or a DuraFlex reline. Catching it early saves real money.
- Ask for the free estimate and read it line by line. The written estimate sets the final price, so ask what’s included: is the old crown removed and hauled away, is the flue inspected, is the cap sized to the flue or guessed at. A clear estimate tells you what you’re actually paying for.
Call (833) 362-8107 for a free estimate on a cap, a crown, or both. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Cap and Crown Repairs: What a Typical Job Looks Like
A cap install is usually the shorter job. The technician measures the flue, sets a stainless or copper cap with the right mesh, and secures it to the crown or flue tile so it can’t shift in wind. Crown repair or replacement takes longer: the old crown is cleaned or removed, the new one is formed with a slope that sheds water away from the masonry, and the flue is checked from the top down while the crown is open. On older Montebello homes with a thin flat crown, replacement is often the right call because there’s nothing solid to patch to.
If the flue itself turns out to be damaged, we don’t jump straight to a full reline. HeatShield resurfacing can often restore a cracked or deteriorated flue liner rather than replacing it, which keeps the cost down and keeps the chimney code-compliant. Restore before you replace is how we approach it. And on chimneys with offset or non-standard flues, a DuraFlex flexible liner can navigate bends that a rigid liner can’t, which matters on some of the older builds we see around town. Contractors who only carry one product line can’t offer that choice; we can, because we work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield, the same lines masonry engineers specify.
One call covers chimney and dryer vent. If you’re having the chimney looked at before heating season, it’s worth having the dryer vent cleaned on the same visit. Both are combustion-exhaust and lint-fire risks, and both require the same diagnostic eye. We handle all three services, sweeping, dryer vent cleaning and chimney repair, from the same trained team.
FAQs – Chimney Cap & Crown Cost
How much does chimney cap installation cost in Montebello?
A chimney cap installed in Montebello typically costs $180 to $550, with most single-flue installs landing around $250 to $400. Multi-flue and custom-sized caps run higher. The written estimate sets the final price. Call (833) 362-8107 for a free quote, and we’ll size the cap to your flue rather than guess at it.
Is it cheaper to repair or replace a chimney crown in Montebello?
Repair is cheaper when the damage is surface-level: expect $400 to $800 for crack repair and resealing. Replacement runs $700 to $1,500 and makes sense when the crown is separated from the flue, crumbling, or formed too thin to patch. A technician checks the crown and flue before recommending, and we don’t push a replacement when a repair will hold. Call (833) 362-8107 for a free estimate and a straight answer.
Do I need a chimney cap in Montebello, or can I skip it?
You need one. A cap keeps rain, birds, squirrels and debris out of the flue, and in Montebello’s wet winters it’s the cheapest protection against water getting into the crown and the liner. A cap costs $180 to $400. A crown replacement because water got in costs $700 to $1,500. The cap pays for itself the first winter. Call (833) 362-8107 to book a free estimate.
Can I get a chimney cap and crown done the same day?
Often, yes. A single-flue cap installed on a crown that only needs a repair can typically be done in one visit. A full crown replacement takes longer because the new crown has to be formed and set, and it may need a return trip depending on the material. Call (833) 362-8107 and we’ll give you a realistic timeline with the estimate. Same-day service is available where the schedule allows.
Does a cracked chimney crown mean I need a whole new chimney?
No. A cracked crown is a crown problem, not a reason to rebuild the chimney. Crown repair runs $400 to $800 and replacement $700 to $1,500. In some cases the flue tile underneath needs attention too, and that’s where HeatShield resurfacing or a DuraFlex reline comes in rather than a rebuild. We diagnose before we quote, so you know exactly which repair you’re paying for. Call (833) 362-8107 for a free estimate.
Why the Cap and Crown Get Priced Together
Most homeowners call about one or the other. They’ve noticed the cap is missing, or a chimney inspector flagged a cracked crown, and they want a price on that one thing. Fair enough. But the two parts fail as a system, and pricing them together is how you avoid a second bill a year or two down the road.
Without a cap, rain runs straight into the flue and splashes the inside of the crown. With a flat, thin crown, water sits on top and works into the mortar bed. Fix one without the other and you’ve left half the problem in place. That’s why the technician looks at both before quoting, and why the combined range of $550 to $1,800 is usually the more useful number for a Montebello homeowner than either line item alone.
The materials matter here too. A cap that’s sized right and secured properly from a contractor-grade line lasts decades. A crown built with the correct slope and overhang throws water clear of the brick instead of letting it pool at the edge. Neither is a big-ticket item on its own, but both are the difference between a chimney that stays dry through the winter and one that starts showing water stains on the ceiling in February. Call (833) 362-8107 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Montebello market as of 2026. Chimney Sweep Montebello offers free estimates – call (833) 362-8107.
Written by the team at Chimney Sweep Montebello, serving Montebello since 2015.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Elena Salazar"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Carrie Sullivan"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Rafael Torres